Non-Destructive Testing Services in Aspers, PA

Non-Destructive Testing Services in Aspers, PA

Aspers, PA Visual Testing (VT)

Probably the most important inspection technique and one we are gifted with is visual testing with our eyes. This is a very common, low cost, quick and effective way to inspect welding, equipment, and coatings. Visual testing is the most important tool for a Certified Welding Inspector (CWI), It’s a certification you can acquire through ASNT or with your company by ASNT TC 1A. Defects commonly found using visual inspection is excessive reinforcement, underfill, undercut, porosity, cold lap. If able to access the inside or root of the weld its possible to see lack of fusion, or incomplete penetration.

Aspers, PA Visual Testing (VT)
Aspers, PA API 1104

Aspers, PA API 1104

The American Petroleum Institute (API) is one of the oldest and most successful programs that started over 100 years ago. Maintaining over 500 standards in the oil and gas field. One of those standards that Integrity Testlabs has experience in is API 1104. This specification covers Welding Procedure specifications to NonDestructive Testing (NDT) acceptance criteria for the welding of pipelines and related facilities. Integrity Testlabs has the capability and knowledge to inspect all welds requiring NonDestructive Testing Services. We can provide Certified Welding Inspection (CWI), Radiography (RT), Ultrasonic Testing (UT), Magnetic Particle Testing (MT), and Penetrant Testing (PT) needs.

ASNT Level II in Aspers, PA

The work horse of any company is your Level II NDT technician. Integrity Testlabs is no exception. Our NDE technicians are SNT-TC-1A certified in PT, MT, RT, UTT, UT Shearwave, UT Phased Array. Capable of completing jobs in the field or shop in a timely manner. To become a Level II NDE technician you need to complete so many OJT hours and classroom training. Completion of these hours can take 2-5 years. Integrity Testlabs provides seasoned technicians to complete your job at hand. Oil Refineries, Chemical Plants, Railroad, Fab shops and Shipyards we have an inspector for you.

ASNT Level II in Aspers, PA

ASNT; American Society for Nondestructive testing

A nonprofit organization which is governed by a board of directors. ASNT publishes and maintains SNT-TC-1A, Standards, Codes of practice, ANSI/ASNT CP-189 and CP-105. They also cover all aspects of qualification and certification of NDT personnel. Integrity Testlabs has a ANST Level III on staff that certifies our Level II and Level I employees so they meet the SNT-TC-1A requirements.

ASNT; American Society for Nondestructive testing
ACFM; Alternating current field measurement in Aspers, PA

ACFM; Alternating current field measurement in Aspers, PA

Integrity Testlabs was one of the first companies to provide this inspection technique in the Northeast. ITL technicians have completed hundreds ACFM inspections on equipment shells in oil refineries in the Northeast. ACFM is a electromagnetic technique used for detecting cracks breaking the surface. Capable of also sizing the defect. ACFM can be used on ferrous and nonferrous metals. ACFM can be fast and effective inspection. It does need the area to be cleaned and electric available to run the ACFM unit. Wet Fluorescent Magnetic Testing (WFMT) can be used as an alternate inspection to confirm the findings of the ACFM.

ANST Level I and Assistants

ANST Level I and Assistants

Becoming certified or learning about Nondestructive testing can be achieved in two ways. Enrolling in a school that provides a certificate or degree or getting hired on with a company with no knowledge of the industry and learning on the job. Typically 40hrs of radiation safety is the first step/certificate that is needed to get started. Once the Assistant has had some time in the industry the company will provide them with classroom training either in house, computer based or sending them to a course provided by a known 3rd party. When the Assistants meets the required OJT hours and classroom time. They will test with the company they are with by completing a specific, general and practical exams. When this is completed, they are now a Level II technician.