Emsworth Non-Destructive Testing Services
ASME B31.3 in Emsworth, PA
The majority of the piping that you see when you pass an Oil Refinery, Chemical Plant, or any other typeprocessing facility is covered under ASME B31.3. Having provided Nondestructive testing services in Delaware City Refinery, Monroe Energy Refinery, Paulsboro Refinery, Advansix Chemical Plant and Chemours Chemical Plants thisspecification is the one used the most by the NDT technicians at Integrity Testlabs. The two most common acceptance criteria for AMSE B31.3 are Normal Fluid Services (NFS) and Severe Cyclic. Integrity Testlabs provides Non Destructive services of RT, UT, MT, PT, VT to cover any needs that may arise.
Emsworth, PA Radiation Safety Officer (RSO)
Any Company providing Radiography services will need a Radiation Safety Officer (RSO). The RSO will oversee all codes and regulations regarding the storage and use of category 2 material. The RSO will oversee all daily activities by the crews. Making sure they are performing the work safely and using all safety devices. Ir-192 is what Integrity Testlabs uses the most to perform radiography. We use QSA Global as our service provider of source and equipment. The D/S-880 has been a trusted workhorse for ITL techs out in the field. ITL is still using source projectors that are over 20 years old.
API 1169
The API 1169 is a recommended practice that focuses on the basic requirements needed to do inspection on new onshore pipelines in a safe manor. Broken in to four sections. Inspector responsibilities; making sure the project moves forward in a safe and efficient manor. Inspector in responsible for planning, monitoring, evaluating, and root cause analysis. Personal and General Pipeline Safety; Making sure the requirements of OSHA 29 CFR 1910 and 29 CFR 1926 are met. Environmental and pollution control; Inspectors must know the local, state, and federal permits for Environmental and Pollution control. Basic understanding of the impacts that pipelines have on of water, land and air. General Pipeline Construction; Observing all phases of construction and understanding the difference between compliance and requirements in term on general pipeline construction.
ANST Level I and Assistants
Becoming certified or learning about Nondestructive testing can be achieved in two ways. Enrolling in a school that provides a certificate or degree or getting hired on with a company with no knowledge of the industry and learning on the job. Typically 40hrs of radiation safety is the first step/certificate that is needed to get started. Once the Assistant has had some time in the industry the company will provide them with classroom training either in house, computer based or sending them to a course provided by a known 3rd party. When the Assistants meets the required OJT hours and classroom time. They will test with the company they are with by completing a specific, general and practical exams. When this is completed, they are now a Level II technician.
Emsworth, PA API 580
API 580 was developed by the American Petroleum Institute (API) in 2002. It is primarily adopted in oil and chemical refineries for developing programs to track and maintain inspections in keys areas of the piping or equipment that is affected by the process it contains. API 580 is program will keep workers and communities safe from releases or catastrophic failures. Integrity Testlabs has provided support for API 580 by providing Radiographic inspections and Ultrasonic Thickness inspections on piping, shells of exchangers, towers and drums. Radiography provides an actual imagine of the corrosion that is occurring and UT grids can provide a visual by numbers on where wall loss is happening.
ASNT; American Society for Nondestructive testing
A nonprofit organization which is governed by a board of directors. ASNT publishes and maintains SNT-TC-1A, Standards, Codes of practice, ANSI/ASNT CP-189 and CP-105. They also cover all aspects of qualification and certification of NDT personnel. Integrity Testlabs has a ANST Level III on staff that certifies our Level II and Level I employees so they meet the SNT-TC-1A requirements.
