Stirling Non-Destructive Testing Services

Stirling Non-Destructive Testing Services

Stirling, NJ Ultrasonic Inspection

Uses include flaw detection/evaluation, dimensional measurements, and material characterization

Stirling Drone Inspection

Using drones is quickly becoming a common inspection method. The biggest attraction is offering a safe way to inspect confined spaces and inspected areas high in the air. With todays advanced cameras they are capable of doing a very good visual inspection. Some drones offer infrared capabilities. This allows the operator to look for hot or cold spots on equipment, structures or solar panels. Smaller drones make for good options to investigate or inspect confined spaces. Larger drones are capable of using or deploying Ultrasonics to perform thickness readings on hard to reach places. To use a drone for commercial purposes the operator must have a FAA license.

Stirling Drone Inspection
ACFM; Alternating current field measurement in Stirling, NJ

ACFM; Alternating current field measurement in Stirling, NJ

Integrity Testlabs was one of the first companies to provide this inspection technique in the Northeast. ITL technicians have completed hundreds ACFM inspections on equipment shells in oil refineries in the Northeast. ACFM is a electromagnetic technique used for detecting cracks breaking the surface. Capable of also sizing the defect. ACFM can be used on ferrous and nonferrous metals. ACFM can be fast and effective inspection. It does need the area to be cleaned and electric available to run the ACFM unit. Wet Fluorescent Magnetic Testing (WFMT) can be used as an alternate inspection to confirm the findings of the ACFM.

API 510 Inspector in Stirling, NJ

API 510 Inspector in Stirling, NJ

This is an individual certification that is achieved through API testing program that test individuals on their knowledge of inspections, maintenance, repairs and alteration of pressure vessels. This certificate is recognized worldwide. Most individuals have many years of inspection experience of the internals of a pressure vessel, performing Ultrasonic Thickness readings, Visual Inspections and other various NDT methods. Having an understanding of how the operations of the facility work also helps you understand where failures might occur in the different variety of vessels. Integrity Testlabs has API 510 in house and contractors that can help your company keep up with planned and unplanned maintenance and help start or maintain corrosion programs.

Stirling, NJ Visual Testing (VT)

Probably the most important inspection technique and one we are gifted with is visual testing with our eyes. This is a very common, low cost, quick and effective way to inspect welding, equipment, and coatings. Visual testing is the most important tool for a Certified Welding Inspector (CWI), It’s a certification you can acquire through ASNT or with your company by ASNT TC 1A. Defects commonly found using visual inspection is excessive reinforcement, underfill, undercut, porosity, cold lap. If able to access the inside or root of the weld its possible to see lack of fusion, or incomplete penetration.

Stirling, NJ Visual Testing (VT)
Stirling, NJ Radiation Safety Officer (RSO)

Stirling, NJ Radiation Safety Officer (RSO)

Any Company providing Radiography services will need a Radiation Safety Officer (RSO). The RSO will oversee all codes and regulations regarding the storage and use of category 2 material. The RSO will oversee all daily activities by the crews. Making sure they are performing the work safely and using all safety devices. Ir-192 is what Integrity Testlabs uses the most to perform radiography. We use QSA Global as our service provider of source and equipment. The D/S-880 has been a trusted workhorse for ITL techs out in the field. ITL is still using source projectors that are over 20 years old.