Non-Destructive Testing Services in Woodridge, NY

Non-Destructive Testing Services in Woodridge, NY

Woodridge Drone Inspection

Using drones is quickly becoming a common inspection method. The biggest attraction is offering a safe way to inspect confined spaces and inspected areas high in the air. With todays advanced cameras they are capable of doing a very good visual inspection. Some drones offer infrared capabilities. This allows the operator to look for hot or cold spots on equipment, structures or solar panels. Smaller drones make for good options to investigate or inspect confined spaces. Larger drones are capable of using or deploying Ultrasonics to perform thickness readings on hard to reach places. To use a drone for commercial purposes the operator must have a FAA license.

Woodridge Drone Inspection
Woodridge, NY API 1104

Woodridge, NY API 1104

The American Petroleum Institute (API) is one of the oldest and most successful programs that started over 100 years ago. Maintaining over 500 standards in the oil and gas field. One of those standards that Integrity Testlabs has experience in is API 1104. This specification covers Welding Procedure specifications to NonDestructive Testing (NDT) acceptance criteria for the welding of pipelines and related facilities. Integrity Testlabs has the capability and knowledge to inspect all welds requiring NonDestructive Testing Services. We can provide Certified Welding Inspection (CWI), Radiography (RT), Ultrasonic Testing (UT), Magnetic Particle Testing (MT), and Penetrant Testing (PT) needs.

ASME B31.1 in Woodridge, NY

Created in the 1930s as a standard code for power piping. ASME B31.1 is a code that provides minimum requirements for safety and guidance for the design of new piping and the repair, modifications and replacement of existing piping. Covering fuel gas and oil systems as well as central and district heating, water and steam systems. ASME B31.1 covers water and steam piping found in all power generation plants throughout the United States. Integrity Testlabs can provided technicians on your next project or outage that have vast experience and knowledge of ASME B31.1 acceptance criteria.

ASME B31.1 in Woodridge, NY
ANST Level I and Assistants

ANST Level I and Assistants

Becoming certified or learning about Nondestructive testing can be achieved in two ways. Enrolling in a school that provides a certificate or degree or getting hired on with a company with no knowledge of the industry and learning on the job. Typically 40hrs of radiation safety is the first step/certificate that is needed to get started. Once the Assistant has had some time in the industry the company will provide them with classroom training either in house, computer based or sending them to a course provided by a known 3rd party. When the Assistants meets the required OJT hours and classroom time. They will test with the company they are with by completing a specific, general and practical exams. When this is completed, they are now a Level II technician.

Woodridge, NY API 650/ API 653

This is a worldwide recognized individual certification achieved through the American Petroleum Institute (API) testing program. Many individuals that hold this certifications are formal inspectors or welders. API 650 is the specification that deals with new construction of oil tanks. API 653 deals with the inspection, maintenance, repairs and alterations of storage tanks. This certification is highly sought after due to the volume of storage tanks located all over the United States holding petroleum products. These tanks require an external inspection every 5 years and an internal inspection every 10 years. Integrity Testlabs has performed many storage tank inspections. Radiographic inspections (RT) on the welding, Wet Fluorescent Magnetic Particle inspection on the floor plates and annular ring weld. Also Providing AUT scans, UT Thickness readings on the shell and UT crawler inspections on the outside of the tank.

Woodridge, NY API 650/ API 653

Certified Welding Inspector (CWT) in Woodridge, NY

Many jobsites ranging from pipelines, fabrication shops, bridges and structural steel fabricators need or require a Certified Welding Inspector (CWI) to help run their quality program, certify welders, perform visual inspections on fit-ups, root passes and final inspections of completed welds. CWIs come from different backgrounds, some have welding experience only, Some have inspection experience only and some have an engineering degree. All CWIs need to know how to interpret the welding procedure, welding qualification, acceptance criteria for defects, welding machines, and consumables. Integrity Testlabs can provide a CWI for your long- or short-term projects.

Certified Welding Inspector (CWT) in Woodridge, NY