Non-Destructive Testing Services in Pennsylvania
ANST Level I and Assistants
Becoming certified or learning about Nondestructive testing can be achieved in two ways. Enrolling in a school that provides a certificate or degree or getting hired on with a company with no knowledge of the industry and learning on the job. Typically 40hrs of radiation safety is the first step/certificate that is needed to get started. Once the Assistant has had some time in the industry the company will provide them with classroom training either in house, computer based or sending them to a course provided by a known 3rd party. When the Assistants meets the required OJT hours and classroom time. They will test with the company they are with by completing a specific, general and practical exams. When this is completed, they are now a Level II technician.
Pennsylvania Non-Destructive Visual Testing (VT)
ACFM; Alternating current field measurement in Pennsylvania
Integrity Testlabs was one of the first companies to provide this inspection technique in the Northeast. ITL technicians have completed hundreds ACFM inspections on equipment shells in oil refineries in the Northeast. ACFM is a electromagnetic technique used for detecting cracks breaking the surface. Capable of also sizing the defect. ACFM can be used on ferrous and nonferrous metals. ACFM can be fast and effective inspection. It does need the area to be cleaned and electric available to run the ACFM unit. Wet Fluorescent Magnetic Testing (WFMT) can be used as an alternate inspection to confirm the findings of the ACFM.
Ground Penetrating Radar in Pennsylvania
Integrity Testlabs can provide a safe, cost effective and nondestructive means to scan concrete slabs or structures prior to drilling, cutting or coring. Prior to doing destructive work to concrete, inspecting the interior for possible post tension cables, electrical lines, pipes and rebar can save you time and money. ITL trained technicians that can provide this service and mark out where these items exist inside the concrete. This risk mitigation technique will allow you to cut, core or drill with a peace of mind.
Pennsylvania API 650/ API 653
This is a worldwide recognized individual certification achieved through the American Petroleum Institute (API) testing program. Many individuals that hold this certifications are formal inspectors or welders. API 650 is the specification that deals with new construction of oil tanks. API 653 deals with the inspection, maintenance, repairs and alterations of storage tanks. This certification is highly sought after due to the volume of storage tanks located all over the United States holding petroleum products. These tanks require an external inspection every 5 years and an internal inspection every 10 years. Integrity Testlabs has performed many storage tank inspections. Radiographic inspections (RT) on the welding, Wet Fluorescent Magnetic Particle inspection on the floor plates and annular ring weld. Also Providing AUT scans, UT Thickness readings on the shell and UT crawler inspections on the outside of the tank.
Pennsylvania ABS Service Provider
American Bureau of shipping is a standard that covers the building, repair and overhauling of vessels ranging from tug boats to container ships. Integrity Testlabs for several years now has been a ABS Service Provider. We are currently one of the only Non-Destructive test companies on the East Coast to have this certification. Integrity Testlabs has provided over 20 years of service to the Philly Ship Yard. We have experience inspecting cargo ships, tankers and Navy vessels that have been built at this facility. We have certified technicians available to handle any RT, UT, MT, PT, Wet Fluorescent Magnetic Particle inspections and Fluorescent Penetrant Inspections needs that arise during your ship building, ship repair, ship maintenance, hull repairs, hull thickness readings, propeller shaft inspection and propeller inspection.
